A new signal processing-based islanding detection method using pyramidal algorithm with undecimated wavelet transform for distributed generators of hydrogen energy

Machine learning-based fault detection methods are frequently combined with wavelet transform (WT) to detect an unintentional islanding condition. In contrast to this condition, these methods have long detection and computation time. Thus, selecting a useful signal processing-based approach is required for reliable islanding detection, especially in real-time applications. This paper presents a new modified signal processing-based islanding detection method (IDM) for real-time applications of hydrogen energy-based distributed generators. In the study, a new IDM using a modified pyramidal algorithm approach with an undecimated wavelet transform (UWT) is presented. The proposed method is performed with different grid conditions with the presence of electric noise in real-time. Experimental results show that oscillations in the acquired signal can be reduced by the UWT, and noise sensitivity is lower than other WT-based methods. The non-detection zone is zero and the maximum detection and computational time is also 75 ms at a close power match.     

Compilation of Modern Technologies To Map Genome-Wide Cytosine Modifications in DNA

Over the past few decades, various DNA modification detection methods have been developed; many of the high-resolution methods are based on bisulfite treatment, which leads to DNA degradation, to a degree. Thus, novel bisulfite-free approaches have been developed in recent years and shown to be useful for epigenome analysis in otherwise difficult-to-handle, but important, DNA samples, such as hmC-seal and hmC-CATCH. Herein, an overview of advances in the development of epigenome sequencing methods for these important DNA modifications is provided.     

负径向电场对带电粒子俘获率影响的数值模拟

本文采用数值方法求解Grad-Shafranov方程反演EAST典型长脉冲放电实验(炮号33068)的平衡位形和磁场分布，进而结合粒子在托卡马克电磁场中的运动方程，模拟氘离子在负径向电场存在时的运动轨迹，并统计不同负径向电场下的氘离子俘获率。结果表明：随负径向电场的增大，氘离子轨迹由扩张通行轨迹向外翻香蕉轨迹再向内翻香蕉轨迹，最后向压缩通行轨迹演变；氘离子俘获率随负径向电场的增大而减小，氘离子初始速度越小，其变化越大。     

冶金矿物和产品水分测定问题探讨

水分测定是冶金行业中矿产原料和产品分析的重要内容,主要包括交货水分、湿存水、化合水等测定类别。尽管水分测定方法本身相对简单,但其涉及到矿物原料、产品结算交割以及其他化学分析的校正计算,属于重要的基础性测定方法。各类矿物、产品几乎都有相应水分测定的国家标准、行业标准,部分还是从国外ISO标准体系中采标而来。文章系统介绍并比较各类矿物原料、产品中交货水分、明水、湿存水、化合水等类别的测定方法。由于ISO标准体系中湿存水含义和国内标准体系湿存水含义有较大差异,其测定操作和用途也有不同,使用空气平衡样品和密封原始样品将会得到数据差异较大的湿存水数据,两种湿存水含义需要明确区分。湿存水对化学称样量、灼减量、化合水的测定有影响,需要用湿存水进行水分校正,才能得到更精确的结果。     

The influence of inner material with different average thermal conductivity on the performance of whole insulation system for liquid hydrogen on orbit storage

At present, several composite insulation systems were proposed that can be used for passive insulation systems, including foam-variable density multilayer insulation (VDMLI), aerogel-VDMLI and hollow glass microspheres (HGMs)-VDMLI. The passive insulation systems with different inner material (IM) showed different performances. However, the relationship between the average thermal conductivity of IM and the insulation performance of the whole system has rarely been investigated. It is of great significance for efficient configuration and matching of the passive insulation system. In this paper, a series of average thermal conductivity of IM were assumed to predict the insulation performance of the whole system at 20 K–300 K and high vacuum. In order to further illustrate the relationship between IM and MLI/VDMLI, the foam was replaced by the HGMs as 5 mm a unit forming a series of HGMs-foam-MLI/VDMLI insulation systems. The performance of the systems was investigated. After the foam was completely replaced by the HGMs, the performance of MLI and VDMLI systems was improved 33% and 13%, respectively. Moreover, each mode of heat transfer including solid conduction, radiation, and gas conduction for foam-MLI/VDMLI and HGMs-MLI/VDMLI insulation systems were calculated and analyzed.